IMPROVED watch mod/ maintenance TOOL KIT $62.00 USD shipped registered

Guest

The price is $62 USD shipped via registered airmail. Please email me at [You must be registered and logged in to see this link.] for availability and I'll give you the Paypal info.

This is a hand assembled kit of selected tools and is not available anywhere else. This one is great for anything from resizing/removing bracelets and straps, to tearing down, customizing, and re-assembling a watch. I'm constantly trying to improve this kit, and with this one I offer much improved professional hands setting tools, an improved hands lifter, and a finer quality spring-bar tool.

[You must be registered and logged in to see this image.]

Included is...

SIZING BLOCK
TAPPING HAMMER
POLISHING CLOTH
BEZEL KNIFE
BEZEL/CASEBACK PRYING TOOL
IMPROVED QUALITY HANDS LIFTER
3 IMPROVED DOUBLE TIPPED HANDS SETTING TOOLS w/ NYLON TIPS
MOVEMENT HOLDER
CASE HOLDER
BRACELET SIZING TOOL
SPRINGBAR TOOL
PIN PUSHERS
CASEBACK OPENER
TWEEZERS
SCRATCH REMOVER PEN
LOUPE
SCREWDRIVERS
NYLON ZIP UP CASE

and please enquire about "ADD A DUST BLOWER FOR $4" deal.

[You must be registered and logged in to see this image.]

The price is $62 USD shipped via registered airmail. Please email me at [You must be registered and logged in to see this link.] for availability and I'll give you the Paypal info.

Thanks,

Jake B

Guest

Does the case opener adjust wide enough for 50mm+ casebacks?

Guest

25or6to4 wrote:: Does the case opener adjust wide enough for 50mm+ casebacks?

No, but I've never seen one! That's almost double the size of what you need for a SEIKO diver caseback, which only needs a 29mm opening! [You must be registered and logged in to see this image.] If the caseback is 50mm +, the watch must be a 70mm+ case size?

Guest

Jake B wrote:

25or6to4 wrote:: Does the case opener adjust wide enough for 50mm+ casebacks?

No, but I've never seen one! That's almost double the size of what you need for a SEIKO diver caseback, which only needs a 29mm opening! [You must be registered and logged in to see this image.] If the caseback is 50mm +, the watch must be a 70mm+ case size?

You're right — my mistake. The caseback isn't the width of the watch....although in many instances it isn't nearly as big a difference as compared to the overall case width. For example, the Zodiac Oceannaire I'm wearing right now is a 45mm watch, and the opposite notches in the caseback are 35mm apart.

What I meant to say is that most of the case openers I've seen, even just the two-pronged models, still don't open wide enough to fit the notches in the caseback of a 50mm watch. How far apart, in mm, are the two prongs at maximum spread?

Guest

Hey there...The max width between the inside edges of the prongs is 34.2 mm

» FS: Beginner's watch mod/ maintenance TOOL KIT $52.50 USD shipped registered
» BNIB SEIKO SRP027K1 "Pilot's" $180 shipped registered
» WATCH #3 has FINALLY SHIPPED BUT, In the Meantime.....................................
» SOILD!!! SEAGULL CHINA AIRFORCE Chrono $200 Shipped
» SOLD!!!! SEIKO SKX007 one-of-a-kind custom "SUB-UDT" diver....$275 shipped