"CRUX" Watch Company

This is a new watch company over at 3T...let me know your thoughts!

LATEST NEWS






New Australian watch company, CRUX first foray into the scene is the introduction of the CX 1000M/3333Ft water resistant modern dive watch. The watch uses an authentic Elaborate Grade 28,000bps ETA2824-2 Swiss Made automatic movement. It measures at 44.5mm x 51.5mm x 15.5mm and has a custom case made entirely from the best 316L stainless steel.

For diving purposes, it has a uni-directional 120 clicks time elapsed bezel with exact minute markers engraved. The bezel is made aesthetically pleasing with its 2-tone color arrangement. The bezel's index is deep engraved for a 3D looks and the darker black part being PVD instead of just merely painted on for that extra bit of toughness against wear. Setting the time is a breeze via the large 8mm signed crown.
The watch case has an inner iron core built in for increased anti-magnetic capability(up to 80,000 A/m) and boosts an automatic Helium value for saturation dives. 4mm thick scratch resistant sapphire crystal with inner anti-reflective coatings are used. There are 4 different dials to choose from, CX-1 to CX-4, all equipped with high quality steel hands. Swiss SuperLuminova is used on all the dials and hands. Each watch also comes with a personalized travel pouch, two 24mm straps, leather and rubber, and a strap changing tool.

Each watch is individually regulated and assembled in our facility in Melbourne after purchase confirmation. Due to time constrains, we can only do a very limited number of watches at any one time, so please contact us for availability. Every watch is thoroughly checked and rechecked before dispatch and covered by 1 year international warranty.

Thank you for giving the new Crux Watch Co. a chance.

LATEST NEWS


May 20, 2010
CX-1, CX-2, CX-3, CX-4 available now for preorder


LATEST NEWS




May 20, 2010
CX-1, CX-2, CX-3, CX-4 available now for preorder



















©2010 CRUX WATCH COMPANY. ALL RIGHTS RESERVED --- NOW THAT IS FUNNY, LIKE THEY CARE ABOUT PROPRIETY!!!.

NOW THE PUNCHLINE ----->>>>






THE CASES ARE ACTUALLY REJECTED SAS CASES THAT WERE SOLD BY THE CASE MAKER TO THESE "CRUKS"...VERY APPROPRIATE NAME IN MY BOOK.

I FEEL SORRY FOR GRAME AT SAS BECAUSE THIS IS THEIR CASE DESIGN AND THEY WILL NOT BE THE FIRST TO SELL IT! ITS A DAMN SHAME!! THIS SEEMS TO BE A RECURRING THEME THESE DAYS...NO HONOR!

You said it ...No honor....

Makes sense that they would be over at 3T...

Mike

YAWWWWWWWWWWWWWWWWWWWWWWWWN!

Before I scrolled down and saw the rest of the post I was thinking that it looked a lot like the SAS Diver I've been keeping an eye on, but without the cool sandwich dial. I know the SAS release has been postponed, hopefully it wasn't because of this.

Gaerme responded on wus that indeed this guy bought his case.Totally Gaermes design.The company that was making it sold it.It wasn't up to
the SAS quality standards.After repeated bad prototypes, Gaerme went with another casemaker.So yes,selling stolen intellectual property.
Really nothing new about it though.

I had thought they looked a little familiar also !..It's odd that this
seems to happen so much in the watch industry. I'm sure these
companies could come up with some original designs if they gave
it some time. Unfortunately, this seems to be an easier route.
Would have been nice to see something new and original !

AtomicTom wrote:

I had thought they looked a little familiar also !..It's odd that this
seems to happen so much in the watch industry. I'm sure these
companies could come up with some original designs if they gave
it some time. Unfortunately, this seems to be an easier route.
Would have been nice to see something new and original !

It's official! Tom's 1st non 100% positive post...I knew you could do it buddy!!!

andrema wrote:

AtomicTom wrote:

I had thought they looked a little familiar also !..It's odd that this
seems to happen so much in the watch industry. I'm sure these
companies could come up with some original designs if they gave
it some time. Unfortunately, this seems to be an easier route.
Would have been nice to see something new and original !

It's official! Tom's 1st non 100% positive post...I knew you could do it buddy!!!

Thanks..Even left out an emoticon !